Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Why Orange County Homeowners Choose Lennox Air Duct Cleaning
Lennox Air Duct Cleaning in Orange County, CA keeps your system’s variable-speed blower and PureAir filtration working the way Lennox designed them. Morton’s Air Duct Orange County is an independent Lennox service provider, not a factory-authorized dealer, so we can tell you straight what’s wearing out, what’s clogged, and what actually needs replacing without warranty politics getting in the way. Our technicians open Lennox Signature, Elite, and Merit systems across Orange County every week, and we see the same pattern again and again: Santa Ana dust and remodel grit collect on blower wheels, upstream of filters, and inside return chases where they quietly drive up amp draw and shorten motor life. Call (831) 244-9367 and we’ll walk you through exactly what we’ll check before any work begins.
Why Trust Mortons Air Duct Orange County for Your Lennox Air Duct Cleaning?
Paul Adeyemi, our owner, picked up his first HVAC training at Los Angeles Trade-Technical College before narrowing his focus to duct cleaning and indoor air quality work more than fifteen years ago. He has provided Lennox service in Mission Viejo and across Orange County for much of that time, including homes around South Coast Plaza in Costa Mesa. Paul is the kind of technician who walks a customer through what the equipment will do before he touches a vent, and who keeps a spare pair of shoe covers in his truck because he forgot them once on a job years ago and still hasn’t let it go.
That same care carries into every Lennox job we take. We clean evaporator coils and blower wheels on Signature Series SLP99V furnaces, Elite Series EL296V air handlers, and Merit Series split systems. We know where Lennox equipment traps dust, how variable-speed ECM motors respond to dirty wheels, and which access panels need careful handling on each model family. And because we’re independent, we call out problems as we find them, whether that’s a flex duct that’s delaminating behind a PureAir S media cabinet or a condensate pan growing bio-sludge in a horizontal Elite Series air handler. We tell you the price before we open the panel, every time.
What We Actually Check on a Lennox System
Before cleaning begins, our crew does a walkthrough of the air handler, return drop, and supply plenum. We look at static pressure readings if your iComfort S30 thermostat has been logging alerts, we pull the filter and inspect the blower wheel fins, and we check the evaporator coil for the kind of fine dust Orange County’s dry climate and Santa Ana winds push through even well-sealed homes. Then we give you a written price. Not an estimate that changes after we open things up. A fixed number, agreed before work starts.
Styles & brands we work with
Common Lennox Air Duct Cleaning Problems We Fix in Orange County
Lennox builds precise equipment, and precision equipment punishes neglect in specific ways. Here are the issues we see most often across Orange County, from older Garden Grove tracts to newer condos near Irvine Lennox service areas:
- Variable-speed ECM blower wheels caked with sub-micron dust. On Elite Series EL296V furnaces and SLP99V Signature models, the variable-speed motor constantly adjusts RPM to hit airflow targets. When fine dust coats the wheel fins, the motor hunts to maintain speed, drawing more amps and generating heat. In the SLP99V specifically, a loaded blower wheel can push amp draw from the mid-fives into the nines, which shortens motor life and sometimes trips limit switches. The fix is pulling the blower assembly, degreasing the wheel, and resealing the housing.
- Flex duct delamination behind PureAir S media cabinets. The PureAir S is a furnace-mounted media cabinet, and in installations where return static pressure runs high, the flex duct connected to the cabinet inlet can delaminate internally. The inner liner separates from the insulation and the airflow pulls it into the filter face, strangling airflow and loading up the blower. We see this in Orange County homes built in the 1980s and 90s, where original flex runs are now past their service life.
- Condensate drain pan bio-sludge in horizontal Elite Series air handlers. Horizontal air handlers in attics and tight closet installs collect moisture in the drain pan, and Orange County’s warm fall months let biological growth take hold. The sludge clogs the drain line, trips the overflow switch, and locks out the system. A duct cleaning that skips the drain pan and line leaves the system down. We include pan cleaning and drain line flushing on every Lennox air handler service.
- Return chase leakage around iComfort S30 wall sensors. The iComfort S30 thermostat uses a wall-mounted sensor that reads temperature and humidity, but if the return chase behind the thermostat isn’t sealed, attic air and fiberglass particles get pulled into the return stream and end up on the evaporator coil. We check this on every Lennox job where the S30 is in play, and we seal the chase penetration with mastic when we find leaks.
- Blocked evaporator coils on XC25 high-efficiency condensers. The XC25 is Lennox’s variable-capacity condenser, and its coil runs cooler and longer than single-stage units. In Orange County’s dry, dusty summers, that coil becomes a magnet for fine particulate that passes through the filter. A dirty coil reduces cooling capacity and raises head pressure. Cleaning it restores the delta-T across the coil and brings capacity back.
Lennox Parts & Our Repair-vs-Replace Approach
We stock factory-equivalent aftermarket flex duct, mastic, and gaskets that match Lennox’s collar dimensions on the Signature, Elite, and Merit lines. For duct sealing, blower cleaning, and coil work, these parts do the job and keep costs down without compromising fit. But for any sealed combustion or venting component, we recommend genuine Lennox parts. A coaxial vent on a Signature Series SLO185V, for example, is fire-rated and sized to the system’s combustion air profile. Using a generic vent there risks more than a leak. It risks safety. We won’t cut that corner.
Our repair-vs-replace stance is simple: if a part can be cleaned and returned to spec, we clean it. If it’s worn past safe or efficient operation, we tell you straight. When a Signature Series coaxial vent is crusted beyond safe cleaning, we’ll tell you it’s cheaper to replace than to chase air leaks. Same with flex duct that’s delaminated past the inner liner. No pressure, just the truth as we see it. Call (831) 244-9367 and we’ll talk through what your Lennox system actually needs.
Our Lennox Service Process – Step by Step
- 1
Diagnosis and system map. We identify your Lennox model family and series, pull any stored iComfort or iComfort S30 alert codes, measure static pressure across the blower and filter, and inspect the return drop, supply plenum, evaporator coil, and blower housing. We check for the specific failure modes listed above, and we check for Orange County-specific issues like Santa Ana blow-by pinhole leaks in original galvanized ducts.
- 2
Targeted service plan and written price. Based on what we find, we lay out what needs cleaning, what needs sealing, and what needs replacing. You get one written price for the whole job before we open a single panel. No per-vent pricing, no incremental add-ons.
- 3
Cleaning and repair with proper protection. We lay drop cloths from the entry to the air handler, put on shoe covers, and keep tools quiet if there’s a napping toddler or a nervous dog in the house. Then we clean the evaporator coil, blower wheel, drain pan, and accessible duct runs using Rotobrush and Nikro equipment, and we apply mastic-sealed duct sealing where we find leakage.
- 4
Post-service testing and verification. We reassemble the system, run it through a full cycle, and compare amp draw and static pressure against the pre-service readings. If we cleaned a blower wheel, we verify the RPM settles where it should. If we sealed ductwork, we verify pressure drop improved. You get before-and-after numbers, not just a summary.
- 5
365-Day Done Right Promise. If something isn’t right after we leave, call us and we’ll make it right. That’s the promise on every Morton’s Air Duct Orange County job, Lennox or otherwise. No fine print, no re-qualification.
See the difference
Before
After
Before
After
Before
AfterLennox Products We Service & Install in Orange County
We work on the full Lennox residential lineup that shows up in Orange County homes built from the 1960s through today:
- Dave Lennox Signature Collection: SLP99V variable-capacity gas furnaces, SLO185V oil furnaces, XC25 and XC20 variable-capacity condensers, PureAir S and PureAir air purification systems, and the iComfort S30 communicating thermostat.
- Lennox Elite Series: EL296V high-efficiency two-stage furnaces, XC16 and EL16XC1 condensers, and Elite Series horizontal and upflow air handlers.
- Lennox Merit Series: ML14XP1 heat pumps, CBX25UH air handlers, and Merit Series single-stage condensers common in mid-century Orange County ranch homes and townhomes.
We keep common gaskets, flex duct, mastic, and blower wheel pullers on the truck, plus Rotobrush and Nikro cleaning equipment sized for Lennox blower housings and coil cabinets. What we can’t stock, we source locally for quick turnaround.
We Also Service These Brands
Most Orange County homes have mixed systems. You might have a Lennox furnace paired with a Trane condenser, or a Carrier air handler upstream of Lennox ductwork. We service Trane and Carrier equipment alongside Lennox, and the same written-price, shoe-covers, no-surprises approach applies to whatever brand is on the label.
FAQs – Lennox Air Duct Cleaning Service in Orange County
No. We are an independent Lennox service provider serving Orange County, not a factory-authorized dealer. That independence is deliberate: we can point out design flaws, cleaning needs, and failure modes without worrying about warranty politics or manufacturer quotas. What we bring instead is specific, hands-on Lennox experience across Signature, Elite, and Merit systems, plus straight answers about what your system needs and what it doesn’t.
It depends on the component. For sealed combustion and venting parts, we use genuine Lennox components to preserve factory fire ratings and clearances. For flex duct, mastic, gaskets, and cleaning materials, we use factory-equivalent aftermarket parts that match Lennox collar dimensions and specs, which keeps repair costs down without compromising fit or function. We’ll tell you which category your repair falls into before any work starts.
Yes, and we see it regularly in Orange County homes with SLP99V and EL296V furnaces. When the blower wheel fins get coated with dust, the variable-speed motor draws more amps to maintain airflow, which generates heat inside the blower housing. On an SLP99V, a loaded wheel can push amp draw from the mid-fives into the nines. If the motor overheats, the limit switch may trip and shut the system down. A proper blower wheel cleaning, with the housing degreased and resealed, brings amp draw back to spec and stops the shutdowns. Call (831) 244-9367 for a diagnosis.
In most cases, yes. The XC25 runs its coil cooler and longer than single-stage condensers, which means it collects fine dust faster, especially during Orange County’s dry, dusty summers and Santa Ana wind events. A coil caked with sub-micron particulate can’t absorb heat efficiently, so cooling capacity drops and the system runs longer to hit the thermostat setpoint. Cleaning the coil restores heat transfer, improves the temperature drop across the coil, and takes load off the compressor. If your XC25 is short-cycling or just not cooling like it used to, call (831) 244-9367 and we’ll check the coil first.
The PureAir S is an air purification system that filters and captures particles, but a musty smell usually comes from biological growth in the evaporator coil or condensate drain pan, not the filter itself. In Orange County’s warm fall weather, moisture in the drain pan or on the coil surface supports mold and bacteria growth, and the blower pushes that odor into the house even when the filter media looks clean. The fix is cleaning the coil and drain pan, then flushing the condensate line. If the smell persists after a coil cleaning, the return duct may have moisture intrusion or the filter media may be past its service life. We’ll diagnose it honestly. Call (831) 244-9367.
Absolutely. If flex duct connected to your Lennox air handler delaminates, leaks at a collar, or pulls away from the return chase, the system draws unconditioned attic air into the return stream. That makes the blower work harder to maintain airflow, which increases energy consumption even when the AC seems to be cooling normally. The leak also pulls attic fiberglass and dust onto the evaporator coil, which compounds the efficiency loss. Sealing the return and repairing delaminated flex can drop static pressure and reduce run times. If your bills have climbed without a change in comfort, call (831) 244-9367 and we’ll measure static pressure and check the return path.
Lennox air duct cleaning in Orange County typically runs between $380 and $720 for a whole-home system, depending on the size of the home, the number of returns, whether we’re cleaning the evaporator coil and blower wheel, and whether any duct sealing is needed. A straightforward single-return condo near Irvine may come in at the lower end. A 3,000-square-foot two-story home in Mission Viejo with a loaded Signature Series blower, coil work, and return duct sealing lands at the higher end for Air Duct Cleaning services. We give one flat price per system before any work starts, so the number we quote is the number you pay. Call (831) 244-9367 for an exact quote.
It depends on the motor’s condition when we open the blower housing. If the ECM motor is still holding spec and the wheel is caked but not cracked, cleaning and balancing can restore performance and buy you real service life. If the motor is already drawing high amps, the bearings are worn, or the wheel is cracked, replacement is the honest call. We’ve opened 2005-era Lennox furnaces in Orange County where a cleaning brought amp draw back to factory spec and the system ran quietly for years after. But we’ve also opened units where the blower was past saving and we said so. We’ll show you the readings and let you decide. Call (831) 244-9367 for an inspection.
Book Your Lennox Service in Orange County, CA
If your Lennox system is running loud, short-cycling, throwing iComfort alert codes, or just moving less air than it used to, call us. We’ll schedule a time that works for your family, show up in uniform with shoe covers and drop cloths, and give you a written price before any work begins. Call (831) 244-9367 for a free estimate.
Written by Paul Adeyemi, Owner at Morton’s Air Duct Orange County, serving Orange County since 2005.